>> 自然科学版 >> 当期目录 >> 正文
低压固态断路器热仿真模型与散热优化设计
时间: 2026-11-20 次数:

王尧,徐嘉豪,郝晨光,等.低压固态断路器热仿真模型与散热优化设计[J].河南理工大学学报(自然科学版),2027,46(1):115-126.

Wang Y, Xu J H, Hao C G, et al.Thermal simulation model and heat dissipation optimization design of low-voltage solid-state circuit breakers[J].Journal of Henan Polytechnic University(Natural Science) ,2027,46(1):115-126.

低压固态断路器热仿真模型与散热优化设计

王尧1,2, 徐嘉豪1, 郝晨光3, 邢云琪1, 盛德杰1

1.河北工业大学 省部共建电工装备可靠性与智能化国家重点实验室,天津  300130;2.河北工业大学 河北省电磁场与电器可靠性重点试验室,天津  300130;3.瑞斯康达科技发展股份有限公司,北京  100080

摘要: 目的  准确计算固态断路器主电路温度分布并进行散热设计,对保证设备安全可靠运行具有重要意义。 方法  在分析固态断路器热传导与热设计原理的基础上,采用FloTHERM热仿真软件建立散热器有限元仿真模型,并导入低压固态断路器印刷电路板PCB文件,构建包括功率半导体器件MOSFET、散热器及主电路PCB布线等关键部件在内的低压固态断路器热仿真模型。分析低压固态断路器主电路热源的传导路径,进行固态断路器散热方案的优化设计,并利用低压固态断路器实物样机及热像仪对其产热及散热进行试验验证。 结果  试验结果表明,MOSFET仿真模型所得壳温与实际测试壳温的相对误差为2.57%,表明该模型具有较高的精度。通过优化热界面材料优选和散热器尺寸,在不改变低压固态断路器体积和功率半导体器件数量的情况下,使MOSFET平均壳温从145.6 ℃降低到81.7 ℃,符合设定的散热要求和实际应用要求。 结论  所提出的低压固态断路器散热优化设计方法具有可行性,对于低压固态断路器散热性能优化设计具有参考意义。

关键词:固态断路器;MOSFET;主电路;热仿真模型;散热设计

doi:10.16186/j.cnki.1673-9787.2024030072

基金项目:国家自然科学基金资助项目(52277143); 中央引导地方科技发展资金项目(226Z2102G)

收稿日期:2024/03/25

修回日期:2024/12/18

出版日期:2026/11/20

Thermal simulation model and heat dissipation optimization design of low-voltage solid-state circuit breakers

Wang Yao1,2, Xu Jiahao1, Hao Chenguang3, Xing Yunqi1, Sheng Dejie1

1.State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin  300130, China;2.Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Hebei University of Technology, Tianjin  300130, China;3.Ruisconda Technology Development Co., Ltd., Beijing  100080, China

Abstract: Objectives  Accurately calculating the temperature distribution of the main circuit of solid-state circuit breakers and designing appropriate heat dissipation are of great significance for ensuring the safe and reliable operation of the equipment.Methods  Based on the analysis of the principles of heat conduction and thermal design for solid-state circuit breakers, a finite element simulation model of the heat sink is established using FloTHERM thermal simulation software. The printed circuit board (PCB) file of the low-voltage solid-state circuit breaker is imported to construct a thermal simulation model that includes key components such as the power semiconductor devices (MOSFETs), heat sink, and PCB layout of the main circuit. The heat conduction paths of the main circuit are analyzed, and an optimized heat dissipation scheme is developed. Experimental verification of the heat generation and dissipation is conducted using a physical prototype of the low-voltage solid-state circuit breaker and a thermal imager.Results  The experimental results show that the relative error between the case temperature obtained from the MOSFET simulation model and the actual measured case temperature is 2.57%, indicating high accuracy of the model. By optimizing the selection of thermal interface materials and the dimensions of the heat sink, the average MOSFET case temperature is reduced from 145.6 °C to 81.7 °C without altering the volume of the low-voltage solid-state circuit breaker or the number of power semiconductor devices, meeting the thermal design requirements and practical application needs.Conclusions The proposed heat dissipation optimization design method for low-voltage solid-state circuit breakers is feasible and provides a reference for the thermal performance optimization of such devices.

Key words:solid state circuit breaker;MOSFET;main circuit;thermal simulation model;heat dissipation design

最近更新