>> 自然科学版期刊 >> 2016年06期 >> 正文
基于构造应力法的优化注浆区域研究
供稿: 尹士献;张根东;李德海 时间: 2018-11-14 次数:

作者:尹士献张根东李德海

作者单位:河南理工大学安全技术培训学院三门峡龙王庄煤业有限责任公司

摘要:为减小煤层底板水害的注浆工作量,提高经济效益,提出基于构造应力法的优化注浆区域方法。以往的注浆方法存在过度注浆或注浆不够而达不到防治水害的目的。运用微分几何知识,并采用离散化方法,计算隔水层的构造应力,进而计算出拉应力;实验测出单向水压条件下隔水岩层的极限抗拉强度,留取一定的安全系数,作为划定注浆区域的临界值;计算出的构造拉应力若大于该值,需要注浆,小于该值不需要注浆。以龙王庄煤矿1114与1111工作面底板注浆工程为例进行对比结果可知,工程量下降了70.8%,经济效益提高了71%,该方法具有一定的工程应用意义。

基金:国家自然科学基金资助项目(51004042);

关键词:构造应力;主曲率;抗拉强度;注浆;

DOI:10.16186/j.cnki.1673-9787.2016.06.001

分类号:TD745

Abstract:In order to reduce grouting amount of floor water disasters and improve economic benefits,regional tectonic stress to optimize grouting area method is proposed. Previous excessive grouting or grouting insufficient methods cannot meet the purpose of the prevention and control of water disasters. Using the differential geometry knowledge and the discretization method,the tectonic stress of water-resisting layer and the tensile stress were calculated. Under condition of experiment measure of unidirectional water pressure,ultimate tensile strength of water proof rock stratum,a certain safety coefficient is gotten,as a designated area of the grouting standard. The calculated tensile stress of the structure is larger than that of the value,and need to be injected and vice versa. Compared with project of Longwangzhuang coal mine 1114 working face and 1111 working face,engineering quantity fell by 70. 8% and the economic benefit increased by 71%. This method has a certain engineering significance.

最近更新