>> 自然科学版期刊 >> 2022 >> 2022年05期 >> 正文
基于400 mm间距栓钉的内衬聚丙烯构件水压试验
时间: 2022-09-10 次数:

王振清, 张祥祥, 张昊,.基于400 mm间距栓钉的内衬聚丙烯构件水压试验[J].河南理工大学学报(自然科学版),2022,41(5):160-165.

WANG Z Q, ZHANG X X, ZHANG H, et al.Hydrostatic test of polypropylene lined components based on 400 mm stud spacing[J].Journal of Henan Polytechnic University(Natural Science) ,2022,41(5):160-165.

基于400 mm间距栓钉的内衬聚丙烯构件水压试验

王振清, 张祥祥, 张昊, 陶元庆

河南工业大学 土木工程学院,河南 郑州 450001

摘要:为了解决地下粮仓防水防潮问题,选用10 mm厚聚丙烯塑料板,通过400 mm间距塑料栓钉将其内衬于粮仓内形成防水构件,并对该构件进行水压试验,研究水压作用下构件的受力性能。结果表明:栓钉400 mm间距下,内衬塑料构件的水压承载力达到38 kPa时发生焊缝破坏,压力下降至18 kPa;继续加载至26 kPa时,发生栓钉车丝滑移破坏,压力下降至17 kPa;最后加载至26 kPa时,塑料板破坏。水压作用下塑料防水板四节点跨中位移随水压增大不断增大,其最大位移为12.82 mm,节点处位移变化较小,最大值为0.74 mm;塑料板内节点处应力较大,四节点跨中位置应力较小。研究成果可为地下粮仓防水设计提供参考。

关键词:地下粮仓;聚丙烯;水压试验;受力性能

doi:10.16186/j.cnki.1673-9787.2020090002

基金项目:国家自然科学基金资助项目(51708180);国家粮食局粮食公益性行业科研专项项目(201413007-01

收稿日期:2020/09/91

修回日期:2021/01/13

出版日期:2022/09/25

Hydrostatic test of polypropylene lined components based on 400 mm stud spacing

WANG Zhenqing, ZHANG Xiangxiang, ZHANG Hao, TAO Yuanqing

School of Civil EngineeringHenan University of TechnologyZhengzhou 450001HenanChina

Abstract:In order to solve the problem of water-proof and moisture‐proof underground granarya 10 mm thick polypropylene plastic plate was selectedwhich was lined with 400 mm plastic studs in the granary to form a waterproof memberand the member was subjected to a hydraulic test to study its mechamical performance under water pressure.The results showed thatAt a stud spacing of 400 mmthe weld failure occured when the hydraulic bearing capacity of the plastic lining reached 38 kPapressure droped to 18 kPaWhen the load continued to 26 kPathe stud wire slipping failure occuredpressure droped to 17 kPaThe final load reached 26 kPa when the plastic plate was broken. Under the action of water pressurethe mid-span displacement of the four nodes of the waterproof plastic plate increased with the increase of water pressure. The maximum displacement was 12.82 mmand the displacement at the nodes changed littleand the maximum value was 0.74 mmthe stress at the nodes in the plastic plate was largerthe stress of the four-node mid-span position was small.The research results provided a reference for the waterproof design of the underground granary.

Key words:underground granary;polypropylene;hydraulic test;mechamical performance

 020_2020090002_王振清_H.pdf



最近更新