朱昌星, 吴大志, 王凤娥,等.基于CT扫描受压注浆体试块三维孔裂隙结构参数表征[J].河南理工大学学报（自然科学版）,doi:10.16186/j.cnki.1673-9787.2023030064

ZHU C X, WU D Z, WANG F E, et al.Characterization of 3D pore and fissure structure parameters of pressurized grouted bodybased on CT scan[J].Journal of Henan Polytechnic University(Natural Science) ,doi:10.16186/j.cnki.1673-9787.2023030064

基于CT扫描受压注浆体试块三维孔裂隙结构参数表征(网络首发)

朱昌星1,2, 吴大志1, 王凤娥2, 孙家鑫1

1.河南理工大学 土木工程学院，河南 焦作  454000;2.河南理工大学 计算机科学与技术学院，河南 焦作  454000

摘要:为研究注浆体试块单轴压缩过程中孔裂隙结构演化特征，以级配砂砾注浆体试块为研究对象，对其 单轴压缩过程分阶段进行工业CT扫描，并采用AVIZO对CT切片进行分析，重构孔裂隙结构三维模型， 定量表征孔裂隙与孔喉特征参数。结果表明：单轴压缩下试块依次经历孔裂隙萌生、发育、扩展与贯通阶 段，孔裂隙演化特征比较明显，萌生阶段孔隙数增幅为14.41%，无明显贯通；发育阶段孔隙数增加326.91%， 伴有一定数目孔隙贯通；扩展阶段孔隙数增幅为-50.79%，孔隙等效直径最大值增幅为 223.45%，大部分 孔隙贯通为裂隙；贯通阶段孔裂隙数目几乎不变，孔隙等效直径最大值增幅为92.83%，裂隙贯通后形成多个破裂面。峰值后试块出现连通孔隙，该阶段注浆体孔隙与喉道发育完全，试块破坏。注浆体试块微观破 坏过程孔隙结构演化特征的成果为后续破碎岩石注浆工程实践提供参考。

关键词:CT扫描;注浆体;三维重构;孔裂隙结构;孔喉模型

中图分类号：TU472

doi:10.16186/j.cnki.1673-9787.2023030064

基金项目:国家自然科学基金资助项目（51874119）；河南省教育厅科学研究项目（2011A440003）；河南理工大学博士基金资助项目（B2009-96）

收稿日期:2023-03-27

修回日期:2023-04-21

网络首发日期: 2023-07-10

Characterization of 3D pore and fissure structure parameters of pressurized grouted bodybased on CT scan（Online）

ZHU Changxing1,2, WU Dazhi1, WANG Fenge2, SUN Jiaxin1

1.School of Civil Engineering，Henan Polytechnic University，Jiaozuo  454000，Henan，China;2.School of Compute Science and Technology，Henan Polytechnic University，Jiaozuo  454000，Henan，China

Abstract:In order to study the structural evolution characteristics of pore and fissure during the uniaxial compression of the grading gravel specimen， industrial CT scanning was performed in stages during the uniaxial compression of the specimen，and AVIZO was used to analyze the CT slices，reconstruct the 3D model of pore and fissure structure，and quantitatively characterize the characteristic parameters of pore and fissure and pore throat.The results show that the test blocks under uniaxial compression go through the stages of pore and fissure emergence，development，expansion and penetration in turn，and the pore and fissure evolution characteristics are relatively obvious，the increase of pore number in the emergence stage is 14.41% without obvious penetration； the increase of pore number in the development stage is 326.91%，accompanied by a certain number of pore penetration； the increase of pore number in the expansion stage is -50.79%，the increase of pore equivalent diameter maximum is 223.45%，and most of the pore and fissure characteristics are quantitative.223.45%，most of the pore penetration is fracture； the number of pore fracture in the penetration stage is almost unchanged，the maximum increase of pore equivalent diameter is 92.83%，multiple fracture surfaces are formed after fracture penetration.After the peak，there are connected pores in the test block，and the pores and throats of the grouted body are completely developed at this stage， and the test block is destroyed.The results of the pore structure evolution characteristics of the microscopic destruction process of the injected body specimen block provide reference for the subsequent practice of fractured rock grouting engineering.

Key words:CT scan;grouted body;3D reconstruction;pore fissure structure;pore throat model

CLC：TU472