>> 自然科学版 >> 当期目录 >> 力学•土木•材料 >> 正文
三向应力作用下柱状节理岩体强度破坏特性试验研究
时间: 2026-11-20 次数:

卢文斌,张栋,何燕新,等.三向应力作用下柱状节理岩体强度破坏特性试验研究[J].河南理工大学学报(自然科学版),2027,46(1):157-165.

Lu W B, Zhang D, He Y X,et al.Experimental study on the strength and failure characteristics of columnar jointed rock mass under triaxial stress[J].Journal of Henan Polytechnic University(Natural Science) ,2027,46(1):157-165.

三向应力作用下柱状节理岩体强度破坏特性试验研究

卢文斌1,2, 张栋1, 何燕新3, 拓志伟1

1.河南理工大学 能源科学与工程学院,河南 焦作  454003;2.河南省煤矿岩层控制国际联合实验室,河南 焦作  454003;3.山东农业大学 水利土木工程学院,山东 泰安  271018

摘要: 目的  为研究多维应力条件下柱状节理岩体的力学性质,开展三向应力作用下的强度破坏特性试验。 方法  根据相似理论,采用石膏、河砂及水等相似材料制备不含节理的立方体试样和具有不同节理倾角的六棱柱试样,利用真三轴试验机开展单轴压缩和三轴压缩试验,研究柱状节理岩体在不同应力条件下的强度特征、应力-应变关系及其破坏模式。 结果  结果表明:不同于立方体试样,柱状节理试样的强度与变形在不同的应力环境下表现出显著各向异性力学特征,且节理面的存在对模型的强度弱化作用明显;2种类型试样的峰值强度随围压升高而增大,节理试样在单轴压缩下的强度及弹性模量随节理倾角变化呈U形线,三轴压缩时试样峰值强度随节理倾角增大分为先减小后增大和无明显变化规律;随着围压增大,节理试样的破坏形态从脆性转变为塑性,各向异性比降低;根据试验结果对试样的破坏模式分类,总结了三维应力条件下柱状节理试样的4种典型破坏类型。 结论  研究结果阐明了柱状节理玄武岩工程力学特性,可为复杂节理岩体相关问题的理论研究和工程分析提供参考。

关键词:柱状节理岩体;三轴压缩;白鹤滩水电站;峰值强度;破坏模式

doi:10.16186/j.cnki.1673-9787.2024100032

基金项目:国家自然科学基金资助项目(41831278);山东省自然科学基金资助项目(ZR2023QE087);河南省高校基本科研业务费专项资金资助项目(NSFRF220423);河南省地下工程与灾变防控重点实验室开放基金资助项目(KFKT2023-05)

收稿日期:2024/10/23

修回日期:2024/12/24

出版日期:2026/11/20

Experimental study on the strength and failure characteristics of columnar jointed rock mass under triaxial stress

Lu Wenbin1,2, Zhang Dong1, He Yanxin3, Tuo Zhiwei1

1.School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo  454003, Henan, China;2.Henan International Joint Laboratory of Coalmine Ground Control, Jiaozuo  454003, Henan, China;3.College of Water Conservancy and Civil Engineering, Shandong Agricultural University, Tai’an  271018, Shandong , China

Abstract: Objectives  To investigate the mechanical properties of columnar-jointed rock masses under multidimensional stress conditions, experimental tests were conducted to examine their strength and failure characteristics under three-dimensional stress. Methods Based on the similarity theory, cubic specimens without joints and hexagonal-prismatic specimens with different joint inclinations were prepared using similar materials, including gypsum, river sand, and water. Uniaxial and triaxial compression tests were performed using a true triaxial testing machine to investigate the strength characteristics, stress-strain relationships, and failure modes of columnar-jointed rock masses under different stress conditions. Results  Unlike the cubic specimens, the columnar-jointed specimens exhibited pronounced anisotropy in strength and deformation under different stress conditions, and the presence of joints significantly reduced specimen strength. The peak strength of both types of specimens increased with increasing confining pressure. Under uniaxial compression, the strength and elastic modulus of the jointed specimens exhibited U-shaped relationships with joint inclination. Under triaxial compression, the peak strength of the jointed specimens either initially decreased and then increased with increasing joint inclination or showed no clear trend. As confining pressure increased, the failure behavior of the jointed specimens transitioned from brittle to ductile, accompanied by a decrease in the anisotropy ratio. Based on the experimental results, the failure modes were classified, and four typical failure modes of columnar-jointed specimens under three-dimensional stress conditions were identified. Conclusions The findings elucidate the engineering mechanical properties of columnar-jointed basalt and provid a reference for theoretical research and engineering analysis of rock masses containing complex joint systems.

Key words:columnar jointed rock mass;triaxial compression;Baihetan Hydropower Station;peak strength;failure mode

最近更新