>> 自然科学版 >> 当期目录 >> 力学•土木•材料 >> 正文
稀土镁合金轧制成形研究进展
时间: 2026-11-20 次数:

徐志超,熊峰,杨文举,等.稀土镁合金轧制成形研究进展[J].河南理工大学学报(自然科学版),2027,46(1):196-208.

Xu Z C, Xiong F, Yang W J,et al.Research progress on rolling processing of rare earth magnesium alloys[J].Journal of Henan Polytechnic University(Natural Science) ,2027,46(1):196-208.

稀土镁合金轧制成形研究进展

徐志超1, 熊峰1, 杨文举1, 杨文朋2, 于合帅1, 杨政鹏1

1.河南理工大学 材料科学与工程学院,河南 焦作  454003;2.河南理工大学 河南省高性能轻金属材料及其数值模拟国际联合实验室,河南 焦作  454003

摘要: 意义   为深入了解稀土镁合金轧制变形的影响因素,探索优异的稀土镁合金轧制工艺,本文综述近年来稀土镁合金轧制方面的研究进展,分析不同轧制工艺下稀土镁合金组织演变及性能变化,为优化工艺路径、推动其工业化应用提供理论依据。  进展   近年来采用同步轧制、衬板轧制和电塑性轧制等工艺对稀土镁合金进行研究,得到了高强韧性镁合金,为无边裂或少边裂的镁合金板材的生产奠定了基础。但目前稀土镁合金轧制工艺仍以同步轧制为主,且多数轧制工艺难以同时提升强度与塑性,部分轧制工艺通过再结晶提高成形性能,但降低了强度。大变形轧制通过晶粒显著细化与高密度位错提高强度,但高密度位错和强基面织构等将导致塑性降低。  结论与展望 目前对稀土镁合金的同步轧制工艺已有较为系统的研究,但仍需进一步探索合金化和优异的轧制工艺参数以改善合金性能。此外,稀土镁合金的先进轧制技术研究较少,且多数研究关注于合金的组织和性能优化,未深入研究其组织演化、强化机制和变形机制,后续需全面研究先进轧制技术下稀土镁合金的变形机制。未来研究应深化对电塑性、衬板轧制等新型工艺中第二相行为与位错交互作用的理解,并积极引入机器学习等数据驱动方法,建立成分-工艺-组织-性能的高维映射模型,加速工艺优化与新型稀土镁合金的理性设计,最终实现其力学性能的协同突破与高效稳定制备。

关键词:稀土镁合金;轧制工艺;成形性能;织构;力学性能

doi:10.16186/j.cnki.1673-9787.2024060023

基金项目:国家自然科学基金资助项目(52103290);河南省重点研发与推广专项(242102230050);河南省高等学校青年骨干教师培养计划项目(2023GGJS056);河南省高校基本科研业务费专项资金资助项目(NSFRF210333);河南理工大学青年骨干教师资助计划项目(2020XQG-16)

收稿日期:2024/06/13

修回日期:2024/08/27

出版日期:2026/11/20

Research progress on rolling processing of rare earth magnesium alloys

Xu Zhichao1, Xiong Feng1, Yang Wenju1, Yang Wenpeng2, Yu Heshuai1, Yang Zhengpeng1

1.School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo  454003, Henan, China;2.Henan International Joint Research Laboratory for High-Performance Light Metallic Materials and Numerical Simulations, Henan Polytechnic University, Jiaozuo  454003, Henan, China

Abstract: Significance To gain deeper insight into the factors influencing the rolling deformation of rare earth magnesium alloys and explore advanced rolling technologies, this review summarizes recent research progress in the rolling processing of rare earth magnesium alloys. The microstructural evolution and mechanical property variations of rare earth magnesium alloys under different rolling processes are analyzed, providing a theoretical basis for process optimization and promoting their industrial applications.  Progress    In recent years, various rolling processes, including synchronous rolling, backing-plate rolling, and electroplastic rolling, have been employed to investigate rare earth magnesium alloys. These approaches have enabled the development of magnesium alloys with high strength and high toughness, laying a foundation for the fabrication of magnesium alloy sheets with no or minimal edge cracking. However, synchronous rolling remains the predominant rolling process for rare earth magnesium alloys, and most rolling technologies face challenges in simultaneously improving strength and ductility.  Some rolling processes improve formability through recrystallization but reduce strength. Large-strain rolling enhances strength through significant grain refinement and increased dislocation density; however, high dislocation density and strong basal texture lead to reduced ductility.   Conclusions and Prospects    At present, systematic studies have been conducted on the synchronous rolling process of rare earth magnesium alloys; however, further exploration of alloying strategies and suitable rolling parameters is required to improve alloy properties. Moreover, research on advanced rolling technologies for rare earth magnesium alloys remains limited, and most existing studies focus primarily on microstructural and mechanical property optimization without in-depth investigation into microstructural evolution, strengthening mechanisms, and deformation mechanisms. Future research should focus on a comprehensive understanding of  deformation mechanisms under advanced rolling processes. In particular, the interactions between secondary phases and dislocations during emerging technologies, such as electroplastic rolling and backing-plate rolling, require further clarification. Additionally, the integration of machine learning and other data-driven approaches should be actively explored to establish high-dimensional mapping models relating composition, processing parameters, microstructure, and mechanical properties, thereby accelerating process optimization and the rational design of novel rare earth magnesium alloys. Ultimately, these efforts are expected to achieve synergistic improvements in mechanical properties and enable efficient and stable manufacturing of rare earth magnesium alloys.

Key words:rare earth magnesium alloys;rolling process;formability;texture;mechanical properties

最近更新